Introduction:

EC-102 acid cleaner is designed to remove off grease、oxide and scum on the copper surface. Especially compatible with OSP be used apply to cleaning selective Ni/Au PCB .EC-102 is an acid cleaner aqueous solution. Do not contain Hydrochloric acid. Powerful cleaning but no damage copper surface .Apply to clean on PCB post-processing copper surface .

Features:

• EC-102 is an acid cleaner aqueous solution. Not containing any chelate,the wastewater treatment is easy.
• Not containing Hydrochloric acid .Powerful cleaning but not damage copper surface.
• Apply to clean on PCB post-processing copper surface.

Equipment specifications:

• Tanks：Polypropylene（PP），PE，PVC etc.
• Heater：Teflon ,quartz，titanium ，stainless steel 316
• Exhaust：recommend
• Filtration:：recommend use filter core by 5～10μm.

Operational Parameters:

Condition	Range	spec
EC-102 ( ml/L)	8 – 12 %	10 %
Temp	35 – 45 ℃	40 ℃
Dip Time	30-60 sec	45 sec
Work load	45m2/L